European Cart Tippers

Diamondback Products is proud to build the heaviest duty European cart tipper in the waste industry.  Our cart lifters are mechanic friendly and have simple designs & fewer moving parts when compared to most other cart lifters in the marketplace. Our cushioned hydraulic cylinder requires no lifting arms and has a 2 year warranty. No other tipper is more reliable and simple to repair than Diamondback tippers.

The 3rd Man European cart tippers have become the tippers of choice for many in the waste removal industry because of their strength, durability, and cost efficient operation. If you are looking for an extreme duty European Cart Lifter, Diamonback 3rd Man Lifters will work as hard as you do!

Model 350 Rear Load Cart Tippers (European Combo)

Diamondback Product’s patented spring shock system gently operates the lower bar assembly and bottom latching system which virtually eliminates any possibility of cart damage. The lower bar rotation insures above ground release of the cart and keeps complete control of the cart throughout the full 6-8 second dump cycle and fully adjustable top and bottom bar holders will fit all chassis heights and can accommodate both domestic style carts and most European style carts without bottom bars.

Characteristics

  • Raised tipper in the full upright position will not make contact with packer sweep blade preventing any possibility of packed lifter damage.

  • Tipper provides a steep 50o dump angle that speeds the emptying of the cart contents, increasing operator productivity.

  • Hydraulic cylinder has an internally adjustable in-line flow control valve for ease of operation.

  • Rated weight lifting capacity of 400 pounds uses 2.1 gallon per minute flow.

  • Unit can be mounted on both rear and side loading trucks.

Construction

  • Designed with ten, hardened steel, shock resistant, self-aligning ball bushings that require very low lubrication maintenance, only three or four times per year.

  • Innovative hydraulic cylinder geometry uses a short 4-3/8 inch stroke which will reduce stress on the hardened 1-1/4 inch chrome cylinder rod, increasing life expectancy of the cylinder.

  • Unique “Break-Away” valve feature prevents tipper damage by allowing the lift cover to swing away from the frame assembly if the faceplate bottoms or interferes with uneven roadways.

  • Compact low profile design, 14x24x6.5 inches, requires less moving parts providing higher strength, increased durability, and mechanic friendly, cost efficient operation.

  • Designed with a welded steel 3/16 inch face plate, 1/2 inch main frame assembly, and ¾ inch internal reinforcement blocks that utilize short, easy to remove grade 8 bolts if repairs are ever required.

  • Built with aircraft grade aluminum sleeve components and zinc coated Nyloc nuts to reduce corrosion.

  • Adjustable bolt on mounting plate allows for ease of installation

View Model 350 Rear Load Cart Tipper Brochure

Model 325 Rear Load Cart Tippers (European Combo)

Diamondback Product’s patented spring shock system gently operates the lower bar assembly and bottom latching system which virtually eliminates any possibility of cart damage. The lower bar rotation insures above ground release of the cart and keeps complete control of the cart throughout the full 6-8 second dump cycle and fully adjustable top and bottom bar holders will fit all chassis heights and can accommodate both domestic style carts and most European style carts without bottom bars.

Characteristics

  • Raised tipper in the full upright position will not make contact with packer sweep blade preventing any possibility of packed lifter damage.

  • Tipper provides a steep 50o dump angle that speeds the emptying of the cart contents, increasing operator productivity.

  • Hydraulic cylinder has an internally adjustable in-line flow control valve for ease of operation.

  • Rated weight lifting capacity of 400 pounds uses 2.1 gallon per minute flow.

  • Unit can be mounted on both rear and side loading trucks.

Construction

  • Designed with ten, hardened steel, shock resistant, self-aligning ball bushings that require very low lubrication maintenance, only three or four times per year.

  • Innovative hydraulic cylinder geometry uses a short 4-3/8 inch stroke which will reduce stress on the hardened 1-1/4 inch chrome cylinder rod, increasing life expectancy of the cylinder.

  • Unique “Break-Away” valve feature prevents tipper damage by allowing the lift cover to swing away from the frame assembly if the faceplate bottoms or interferes with uneven roadways.

  • Compact low profile design, 14x24x6.5 inches, requires less moving parts providing higher strength, increased durability, and mechanic friendly, cost efficient operation.

  • Designed with a welded steel 3/16 inch face plate, 1/2 inch main frame assembly, and ¾ inch internal reinforcement blocks that utilize short, easy to remove grade 8 bolts if repairs are ever required.

  • Built with aircraft grade aluminum sleeve components and zinc coated Nyloc nuts to reduce corrosion.

  • Adjustable bolt on mounting plate allows for ease of installation

Diamondback model 450EC European Cart Tipper

Model 450EC Rear Load Cart Tippers (European Combo)

Diamondback Product’s patented spring shock system gently operates the lower bar assembly and bottom latching system which virtually eliminates any possibility of cart damage. The lower bar rotation insures above ground release of the cart and keeps complete control of the cart throughout the full 6-8 second dump cycle and fully adjustable top and bottom bar holders will fit all chassis heights and can accommodate both domestic style carts and most European style carts without bottom bars.

Characteristics

  • Raised tipper in the full upright position will not make contact with packer sweep blade preventing any possibility of packed lifter damage.

  • Tipper provides a steep 50o dump angle that speeds the emptying of the cart contents, increasing operator productivity.

  • Hydraulic cylinder has an internally adjustable in-line flow control valve for ease of operation.

  • Rated weight lifting capacity of 400 pounds uses 2.1 gallon per minute flow.

  • Unit can be mounted on both rear and side loading trucks.

Construction

  • Designed with ten, hardened steel, shock resistant, self-aligning ball bushings that require very low lubrication maintenance, only three or four times per year.

  • Innovative hydraulic cylinder geometry uses a short 4-3/8 inch stroke which will reduce stress on the hardened 1-1/4 inch chrome cylinder rod, increasing life expectancy of the cylinder.

  • Unique “Break-Away” valve feature prevents tipper damage by allowing the lift cover to swing away from the frame assembly if the faceplate bottoms or interferes with uneven roadways.

  • Compact low profile design, 14x24x6.5 inches, requires less moving parts providing higher strength, increased durability, and mechanic friendly, cost efficient operation.

  • Designed with a welded steel 3/16 inch face plate, 1/2 inch main frame assembly, and ¾ inch internal reinforcement blocks that utilize short, easy to remove grade 8 bolts if repairs are ever required.

  • Built with aircraft grade aluminum sleeve components and zinc coated Nyloc nuts to reduce corrosion.

  • Adjustable bolt on mounting plate allows for ease of installation