Diamondback Products is proud to build the heaviest duty rear load cart tipper in the waste industry. Our cart lifters are mechanic friendly and have simple designs & fewer moving parts when compared to most other cart lifters in the marketplace. Our cushioned hydraulic cylinder requires no lifting arms and has a 2 year warranty. No other tipper is more reliable and simple to repair than Diamondback tippers.
The 3rd Man rear load cart tippers have become the tippers of choice for many in the waste removal industry because of their strength, durability, and cost efficient operation. If you are looking for an extreme duty Rear Load Cart Lifter, Diamonback 3rd Man Lifters will work as hard as you do!
Model 500 Rear Load Cart Tippers
Diamondback 3rd Man Tippers are engineered with fewer moving parts for longer life, easier maintenance, and to save you money on parts inventory. Simple is Better.
Highlights
- Eliminates Bottom Bar Cart Damage – Patented spring bottom bar latching system virtually eliminates bottom bar damage by providing shock absorption during dump cycle and also ensures above ground release.
- Easy cart engagement – Sweeping action of cart lifter allows for easy cart engagement on uneven ground.
- High/Deep dump – Cart lifter gives a high/deep throw into hopper allowing for speed of emptying carts.
- Ground Clearance – Cart lifter rotates back under hopper allowing for the most possible ground clearance available.
- Heavy duty lifting and drive arms – 3/4” solid steel lifting and drive arms
- Self-Aligning Ball Bushings – Made of hardened steel, shock and corrosion resistant, and require very low lubrication maintenance. All bushings are housed in “Air Craft” grade aluminum to help cut down on rust and corrosion for ease of repair.
- 26K Rotary Actuator – The largest actuator used in the lifter industry. Actuator produces 26K ft/lb of torque at 3000 psi
Characteristics
-
Compatible with standard 60-95 gallon domestic style two bar carts.
-
Counterbalance-spring latching system for the bottom bar requires no direct linkage.
-
Sweeping action of top bar allows for easier cart engagement on uneven ground.
-
Steep 45° dump angle speeds emptying of carts.
-
Two year limited warranty.
Construction
-
Innovative counterbalance-spring latching system gently operates the lower bar holder significantly reducing shock loading and any possibility of cart damage.
-
Driver and guide arms are 1/2“ steel. Mounting plate is 1/2” steel. Face plate is 3/8” steel.
-
Heavy duty cart tipper faceplate measures 24” wide by 20” high and has a 3/8” thickness.
-
Designed with durable, low maintenance, shock resistant, self-aligning ball bushings.
-
Utilizes less moving parts providing mechanic friendly, low cost operation.
-
Actuator shafts are designed with splined ends to provide increased life.
-
Bolt on mounting plate allows for easy installation.
-
Powder coated in safety orange.
Key Features & Performance Specs
- Fits all ANSI Z245.30 (domestic two bar style) Carts & meets all Z245.60 Cart Specifications
- Dumps 400 lbs @ 1600 psi
- 6-8 sec cycle time at 3.2 gpm
- 45 degree Dump angle
- Mounting height 37” to 41” (mounting plate included)
- Heat treated pivot pins
- 3/8” thick faceplate
- Powder coated finish
- Two year limited warranty
Model 600 Rear Load Cart Tippers
Diamondback 3rd Man Tippers are engineered with fewer moving parts for longer life, easier maintenance, and to save you money on parts inventory. Simple is Better.
Highlights
- Kicker Bar Friendly – Slim design allows installation on most rear load trucks that utilize a kick/container bar for emptying commercial containers.
- Eliminates Bottom Bar Cart Damage – Patented spring bottom bar latching system virtually eliminates bottom bar damage by providing shock absorption during dump cycle and also ensures above ground release.
- Easy cart engagement – Sweeping action of cart lifter allows for easy cart engagement on uneven ground.
- High/Deep dump – Cart lifter gives a high/deep throw into hopper allowing for speed of emptying carts.
- Ground Clearance – Cart lifter rotates back under hopper allowing for the most possible ground clearance available.
- Heavy duty lifting and drive arms – 3/4” solid steel lifting and drive arms.
- Self-Aligning Ball Bushings – Made of hardened steel, shock and corrosion
resistant, and require very low lubrication maintenance. - 26K Rotary Actuator – Actuator shaft is designed with splined ends and matching collar, not keyways, to provide increased life. Actuator produces 26K ft/lb of torque at 3000 psi
Characteristics
-
Compatible with standard 60-95 gallon domestic style two bar carts.
-
Counterbalance-spring latching system for the bottom bar requires no direct linkage.
-
Sweeping action of top bar allows for easier cart engagement on uneven ground.
-
Steep 45° dump angle speeds emptying of carts.
-
Two year limited warranty.
Key Features & Performance Specs
- Fits all ANSI Z245.30 (domestic two bar style) Carts & meets all Z245.60 Cart Specificatons
- Dumps 400 lbs @ 1600 psi
- 6-8 sec cycle time at 3.2 gpm
- 45 degree Dump angle
- Mounting height 37” to 41” (mounting plate included)
- Heat treated pivot pins
- 3/8” thick faceplate
- Powder coated finish
- Two year limited warranty
Model 200 Rear Load Cart Tippers
Diamonback’s Patented spring shock system gently operates the lower bar assembly and bottom latching system which virtually eliminates any possibility of cart damage. The lower bar rotation insures above ground release of the cart and keeps complete control of the cart throughout the full 6-8 second dump cycle. Our fully adjustable top and bottom bar holders fit all chassis heights and can accommodate all styles of two bar domestic carts.
Highlights
- Kicker Bar “Friendly” – Slim design allows installation on most rear load trucks that utilize a kick/container bar for emptying commercial containers.
- Eliminates Bottom Bar Cart Damage – Patented spring bottom bar latching system virtually eliminates bottom bar damage by providing shock absorption during dump cycle and also ensures above ground release.
- Self-Aligning Ball Bushings – Made of hardened steel, shock and corrosion resistant, and require very low lubrication maintenance.
- Cushioned Hydraulic Cylinder – Hydraulic cylinder provides a smooth lifting action in both up & down directions which helps prevent cart damage.
- Fully Adjustable – Mounting plate, top bar holder, and bottom latch assembly are fully adjustable to help ease the installation on most rear load trucks.
- No Sweep Blade Interference – Correctly mounted Cart Lifter in dump position will not make contact with packer blade, preventing any possibility of packed lifter damage.
Characteristics
-
Raised tipper in the full upright position will not make contact with packer sweep blade preventing any possibility of packed lifter damage.
-
Tipper provides a steep 55o dump angle that speeds the emptying of the cart contents, increasing operator productivity.
-
Hydraulic cylinder has an internally adjustable in-line flow control valve for ease of operation.
-
Rated weight lifting capacity of 400 pounds uses 2.1 gallon per minute flow.
-
Unit can be mounted on rear loading trucks that utilize kicker bars.
Construction
-
Designed with durable hardened steel, shock resistant, self-aligning ball bushings that require low lubrication maintenance, only once per month.
-
Innovative hydraulic cylinder geometry uses a short 4-1/2 inch stroke which will reduce stress on the hardened 1-1/4 inch chrome cylinder rod, increasing life expectancy of the cylinder.
-
Compact 19” x 16” x 4.5” design utilizes less moving parts and provides increased durability, and mechanic friendly, cost efficient operation.
-
Designed with a welded steel 3/8 inch face plate, 1/2 base plate assembly, and 1-1/2 inch internal reinforcement blocks that utilize short, easy to remove grade 8 bolts and zinc coated Nyloc nuts if repairs are ever required.
-
Adjustable bolt on mounting plate allows for ease of installation.
Model 100 Rear Load Cart Tippers
Diamondback Product’s patented spring shock system gently operates the lower bar assembly and bottom latching system which virtually eliminates any possibility of cart damage. The lower bar rotation insures above ground release of the cart and keeps complete control of the cart throughout the full 6-8 second dump cycle and fully adjustable top and bottom bar holders fit all chassis heights and can accommodate all styles of two bar domestic carts.
Highlights
- Eliminates Bottom Bar Cart Damage – Patented spring bottom bar latching system virtually eliminates bottom bar damage by providing shock absorption during dump cycle and also ensures above ground release.
- Self-Aligning Ball Bushings – Made of hardened steel, shock and corrosion resistant, and require very low lubrication maintenance. All ball bushings are housed in “Aircraft” grade aluminum to help cut down on rust and corrosion for ease of repair.
- Cushioned Hydraulic Cylinder – Hydraulic cylinder provides a smooth lifting action in both up & down directions which helps prevent cart and lifter damage.
- Fully Adjustable – Mounting plate, top bar holder, and bottom latch assembly are fully adjustable to help ease the installation on most rear load trucks.
- Hydraulic Break-Away Feature Option – Hydraulic valve minimizes damage caused by ground collision. No more sheared pins to replace!
- No Sweep Blade Interference – Correctly mounted Cart Lifter in dump position will not make contact with packer blade, preventing any possibility of packed lifter damage.
Characteristics
- Raised tipper in the full upright position will not make contact with packer sweep blade preventing any possibility of packed lifter damage.
- Tipper provides a steep 50o dump angle that speeds the emptying of the cart contents, increasing operator productivity.
- Hydraulic cylinder has an internally adjustable in-line flow control valve for ease of operation.
- Rated weight lifting capacity of 400 pounds uses 2.1 gallon per minute flow.
- Unit can be mounted on both rear and side loading trucks.
Construction
- Designed with ten, hardened steel, shock resistant, self-aligning ball bushings that require very low lubrication maintenance, only three or four times per year.
- Innovative hydraulic cylinder geometry uses a short 4-3/8 inch stroke which will reduce stress on the hardened 1-1/4 inch chrome cylinder rod, increasing life expectancy of the cylinder.
Unique “Break-Away” valve feature prevents tipper damage by allowing the lift cover to swing away from the frame assembly if the faceplate bottoms or interferes with uneven roadways. - Compact low profile design, 14x24x6.5 inches, requires less moving parts providing higher strength, increased durability, and mechanic friendly, cost efficient operation.
- Designed with a welded steel 3/16 inch face plate, 1/2 inch main frame assembly, and ¾ inch internal reinforcement blocks that utilize short, easy to remove grade 8 bolts if repairs are ever required.
- Built with aircraft grade aluminum sleeve components and zinc coated Nyloc nuts to reduce corrosion.
- Adjustable bolt on mounting plate allows for ease of installation.
- “Built to customer specifications.”